How to Climb Better Cycling: W/kg, Threshold, Cadence and Pacing
How to climb better cycling: watts per kilo, threshold and VO2max work, cadence, seated vs standing, pacing, strength intervals and sensible weight.
Climbs don't lie. They strip away everything but the numbers — your weight, your power, your patience — and lay them bare, metre after metre. If you want to know how to climb better cycling, the honest answer is less romantic than the stories suggest: there's no magic pedal stroke. There's a short list of things that genuinely move the needle, and a long list of things that waste your energy. Let's take the ones that matter, in the right order.
The number that decides everything: watts per kilo
On the flat, raw power wins. On a climb, what matters is the ratio between the power you produce and the weight you carry up the hill: watts per kilo (W/kg). It's the single number that separates the rider who pulls away from the rider who drifts off the back when the road tilts up.
Two riders with identical FTP but different body weight will climb at different speeds — and the steeper the climb, the wider the gap: on gentle gradients aerodynamics still matters, on real climbs watts per kilo rules. That's why climbing work targets both sides of the ratio: raising the watts you can sustain, and — when it makes sense — trimming surplus weight. But the order of priorities matters. For most amateurs, building power is both safer and more rewarding than chasing the scale. Weight comes later, and carefully.
Building the engine: threshold and VO2max
Climbing well means holding high power for minutes at a time — sometimes for tens of minutes. The two kinds of work that genuinely move the needle are these (the formats are typical examples, not magic formulas):
- Threshold work: longer intervals at a "hard but controlled" intensity, close to your functional threshold. For example, 2–3 blocks of 10–20 minutes. This is the engine that keeps you glued to a long climb without blowing up.
- VO2max work: shorter, sharper efforts of 3–5 minutes near your sustainable maximum, with recoveries roughly as long as the effort. This raises the ceiling on your power and gives you the surges you need when the gradient bites.
One practical rule for riders with limited time and recovery outweighs any training plan: hard sessions need spacing. Avoid stacking two intense sessions on consecutive days. It isn't a physiological law — experienced coaches also use blocks of consecutive hard days, but only with easy weeks around them and an athlete who can absorb them. And if you're new to high intensity, start with modest volume and build over time. Your threshold is the reference point everything else revolves around — if you're unsure how to measure it, start with how to calculate your cycling FTP.
Cadence on climbs: find yours, not someone else's
There is no universal "correct" climbing cadence. There's the one that lets you produce power for longer with less fatigue. On a climb, with gravity working against you, your natural cadence tends to drop — and that's perfectly normal.
The thing to avoid is getting trapped in a gear that's too big, grinding your legs full of fatigue until they fold under you. Running climbing-friendly gearing isn't a weakness; it's what lets you choose your cadence rather than have it forced on you. On climbs even the professionals drop to around 70 rpm, versus 90 on the flat: a slightly lower cadence is normal. But be careful: at the same power, very low cadences (around 60 or below) are less efficient, and on the great climbs the highest watts come with higher cadences, not lower. The optimal window is personal: find it by experimenting, not by grinding — and not by copying the pros on television.
Seated versus standing: two tools, not a preference
Seated and standing have similar mechanical efficiency: the watts cost the same energy. Standing, however, raises heart rate and ventilation — so staying seated is the default for most of a climb, on steady gradients and below maximal aerobic power.
Getting out of the saddle has its place at specific moments: on the steepest ramps, to inject a change of rhythm, or simply to stretch your back and unload the muscles for a few pedal strokes. Standing you produce more power — for efforts near or above maximal aerobic power it's the position that performs best — but heart rate and breathing rise, so it's a tool to ration, not abuse. The smart move is to train both, so you can shift from one to the other without losing rhythm when the climb demands it.
Pacing: climbs are won with your head
The most common climbing mistake is starting too hard. The buzz of the first metres, the urge not to lose the wheels ahead — and halfway up, your legs send the bill. Climbing well is, above all, an exercise in pacing.
If you ride with a power meter, use your FTP as a reference ceiling and start slightly below the effort you think you can hold, leaving yourself a margin to finish stronger. If you ride on feel, apply the same principle: the first third should feel almost too easy. On uneven gradients, don't chase a fixed number at all costs — push a little harder on the steep pitches and ease off slightly on the shallower ones, keeping your effort constant rather than your speed. A well-paced climb is one you finish having given everything, not one where you fade three kilometres from the top.
Low-cadence strength work
Strength-endurance repeats (SFR) — climbs ridden in a big gear at a low cadence (around 60 revolutions per minute), staying seated and pushing under control — are an Italian cycling tradition, but the research is candid: evidence that they improve strength, pedalling or performance is weak and mixed. If you want specific strength, heavy gym strength training has far stronger evidence. SFR can stay as a training variant, not a pillar.
Use them with common sense: there's no evidence that low cadence itself damages knees — joint load rises with power and with a saddle set too low, not with the revolutions per minute. But if you have knee pain, any high-force work deserves caution and a checked bike fit, and nothing should be forced through joint discomfort. Keep them limited in number, especially during build phases, and treat them as one ingredient in the plan — not the main course.
Body composition, done sensibly
Yes, losing surplus weight improves your W/kg. But it's the last piece, not the first, and it needs to be handled with care. Slashing calories while training hard is an excellent way to sabotage your session quality, your recovery, and your health.
The sensible approach is gradual: small, sustainable changes to eating habits, kept well away from your most important goals, and always eating enough to fuel your training. The aim isn't to be light — it's to be light and strong. Weight loss that costs you watts doesn't make you climb better; it just makes you climb more tired.
Where Per Pro fits in
Climbing better isn't a matter of tricks. It's about assembling these factors in the right order, in the right doses, inside your actual week. That's exactly what Per Pro does: take the training method of real World Tour coaches — the same method that takes professionals to the start line — and redraw it around the time you genuinely have, your goals, and your limits. Threshold, VO2max, strength work, and pacing, built to measure rather than copied from a pro. You can see how it works at per-pro.com.
The takeaways
- On climbs, watts per kilo rule: build power first, then manage weight.
- The engine is built with threshold and VO2max work, spacing the hard sessions by default.
- The right cadence is yours: run climbing-friendly gearing and experiment, don't copy.
- Seated as default (same efficiency, lower heart rate), standing as a tool for ramps and rhythm changes.
- Pace it: start below your ceiling and keep effort constant, not speed.
- Low-cadence strength work (SFR) is a variant with weak evidence, not a pillar: heavy gym strength work has far stronger support.
- Weight matters, but last and with judgement: light and strong, never light and flat.
References
The claims in this article rest on the following peer-reviewed publications:
- Swain DP (1994). The influence of body mass in endurance bicycling. Med Sci Sports Exerc, 26(1):58-63. doi:10.1249/00005768-199401000-00011
- Padilla S, Mujika I, Cuesta G, Goiriena JJ (1999). Level ground and uphill cycling ability in professional road cycling. Med Sci Sports Exerc, 31(6):878-885. doi:10.1097/00005768-199906000-00017
- Lucía A, Hoyos J, Chicharro JL (2001). Preferred pedalling cadence in professional cycling. Med Sci Sports Exerc, 33(8):1361-1366. doi:10.1097/00005768-200108000-00018
- Vogt S, Roecker K, Schumacher YO, Pottgiesser T, Dickhuth HH, Schmid A, Heinrich L (2008). Cadence-power-relationship during decisive mountain ascents at the Tour de France. Int J Sports Med, 29(3):244-250. doi:10.1055/s-2007-965353
- Lucía A, San Juan AF, Montilla M, Cañete S, Santalla A, Earnest C, Pérez M (2004). In professional road cyclists, low pedaling cadences are less efficient. Med Sci Sports Exerc, 36(6):1048-1054. doi:10.1249/01.MSS.0000128249.10305.8A
- Arkesteijn M, Jobson SA, Hopker J, Passfield L (2013). Effect of gradient on cycling gross efficiency and technique. Med Sci Sports Exerc, 45(5):920-926. doi:10.1249/MSS.0b013e31827d1bdb
- Millet GP, Tronche C, Fuster N, Candau R (2002). Level ground and uphill cycling efficiency in seated and standing positions. Med Sci Sports Exerc, 34(10):1645-1652. doi:10.1097/00005768-200210000-00017
- Hansen EA, Waldeland H (2008). Seated versus standing position for maximization of performance during intense uphill cycling. J Sports Sci, 26(9):977-984. doi:10.1080/02640410801910277
- Swain DP (1997). A model for optimizing cycling performance by varying power on hills and in wind. Med Sci Sports Exerc, 29(8):1104-1108. doi:10.1097/00005768-199708000-00017
- Atkinson G, Peacock O, Passfield L (2007). Variable versus constant power strategies during cycling time-trials: prediction of time savings using an up-to-date mathematical model. J Sports Sci, 25(9):1001-1009. doi:10.1080/02640410600944709
- Abbiss CR, Laursen PB (2008). Describing and understanding pacing strategies during athletic competition. Sports Med, 38(3):239-252. doi:10.2165/00007256-200838030-00004
- Laursen PB, Jenkins DG (2002). The scientific basis for high-intensity interval training: optimising training programmes and maximising performance in highly trained endurance athletes. Sports Med, 32(1):53-73. doi:10.2165/00007256-200232010-00003
- Rønnestad BR, Hansen J, Ellefsen S (2014). Block periodization of high-intensity aerobic intervals provides superior training effects in trained cyclists. Scand J Med Sci Sports, 24(1):34-42. doi:10.1111/j.1600-0838.2012.01485.x
- Hansen EA, Rønnestad BR (2017). Effects of cycling training at imposed low cadences: a systematic review. Int J Sports Physiol Perform, 12(9):1127-1136. doi:10.1123/ijspp.2016-0574
- Ericson MO, Nisell R (1986). Tibiofemoral joint forces during ergometer cycling. Am J Sports Med, 14(4):285-290. doi:10.1177/036354658601400407
- Rønnestad BR, Mujika I (2014). Optimizing strength training for running and cycling endurance performance: a review. Scand J Med Sci Sports, 24(4):603-612. doi:10.1111/sms.12104
- Thomas DT, Erdman KA, Burke LM (2016). American College of Sports Medicine joint position statement: nutrition and athletic performance. Med Sci Sports Exerc, 48(3):543-568. doi:10.1249/MSS.0000000000000852